S480x1000 Winho

เครื่องกลึง / LATHE MODEL S480x1000 Winho

Specification

 

Specification S480x1000 Winho
Swing over bed 480 mm (18-1/2")
Swing over cross slide 280 mm (11")
Center Height 235 mm (9-1/4")
Center distance 1000 mm (40")
Swing over gap 690 mm (27-1/8")
Bed width 300 m (11-4/5")
Spindle nose ASA D1 -6 / D1 -8 (Opt.)
Spindle bore 58 mm (2-1/4") / 80 mm (3") (Opt.)
Taper of spindle bore MT6/MT7 (Opt.)
Spindle speed 20~2000 rpm (12 steps)-spindle bore:58mm /
40~2000 rpm (12steps)-spindle bore:80mm
Inch Threads range 4~56 TPI
Metric Threads Range P0.5~P7
Longitudinal feeds range 0.05~0.82 mm (0.002~0.032")
Cross feeds range 0.02~0.4 mm (0.001~0.0094")
Leadscrew Diameter 35 mm (1-1/3")
Leadscrew pitch 4TPI or 6 mm
Taper of tail center MT4
Tail spindle travel 150 mm (5-7/8")
Tail spindle diameter 68 mm (2-2/3")
Main drive motor 7.5HP (5.625KW) / 10HP (7.5KW. Opt.)
Coolant pump 1/8HP (0.1 KW)
Compound rest travel 125 mm (4-7/8")
Cross slide travel 245 mm (9-2/3")
Machine / Packing Dimensions (cm) L:215 W:81 H:122 / L:228 W:95 H:168
Net weight / Gross weight (kgs) 1800 / 1900

 

Visitors: 77,514